Three-Phase Energy Manager Clever - Components -
Try out the monitoring and supervision system of a real PV system right now,
in real time

Three-Phase Energy Manager Clever - Components


Clever Master Box

Componenti 1
  • Power 100-240VAC 50/60Hz max. 0,1 A
  • Max. intake power 10 W
  • Protected by 500mA fuse
  • 6 inputs for Ampere transformer 1/2500, max. measurable current
    • 60 Arms with Power Sensor CCP00M00 suggested up to 30 kW
    • 250 Arms with Power Sensor CCP00100 suggested up to 100 kW
    • 500 Arms with Power Sensor CCP00200 suggested up to 200 kW
    • Higher powers on request
  • 2 digital inputs for 5V pulse meters, input impedance 1K
  • 5 analog inputs for NTC 10K sensor, optionally configured initially as signal digital inputs 0-5 V; 0-10 V; 4-20 mA OUTPUTS
  • 5 contact relay resistive outputs NA 230 VAC max 6 A, one being for exchange
  • Analog active and reactive power and energy measurement and power factor measurement for 6 three-phase production and exchange lines, both as a total for the 3 phases and by single phase
  • 0.6% full scale precision along the entire measurement chain (CTs + Clever)
  • Measurement of the harmonic current and voltage content by phase
  • Measurement of the neutral current
  • 8 MBytes flash memory
  • The data are sampled, totalled and stored internally every 5 minutes, 60 minutes, 24 hours, 1 month, 1 year. On every link, they are downloaded to the WEB CENTER and PC VIEW computer, where they remain available indefinitely, and they can also be stored locally for up to 10 years.
  • RS 485 for inverter interface in standard MODBUS mode
  • USB 2.0 with software interface for loading programs and configuration data from a USB flash
  • Standard communication with local CLEVER devices with 868 MHz radio transmission
  • Internal antenna
  • Transceiver power 10 dBm
  • Interface to the local network and internet by LAN, WIFI or GPRS.
  • Discreet design plastic case for mounting on 9-module DIN bar
  • Connections with screw clamps (extractable for the relays)

Clever View

Componenti 2
  • +5 V DC power feed
  • Maximum absorbed power 2W by USB connector
  • Backup power by single-cell 400 mAh lithium battery, rechargeable in 5 hours
  • 3.5” TFT display rear lit by led
  • Resistive Touchscreen
  • 868 MHz radio interface for connection to the CLEVER
  • Polycarbonate case measuring 150 x 110 mm, 28 mm thick, with table stand or wall fitting
  • Glossy black colour

Clever Power Sensor T

Componenti 3
  • Maximum current, effective (and peak) current CT 60 Arms
  • Calibrated at 0.15% with phase correction on CLEVER
  • DC current tolerated without affecting the readings
  • Cable length 1,200 mm
  • Maximum cable diameter 8.5 mm
  • Size 37 mm x 75 mm, d 18 mm

Clever Power Sensor 100/200/400

Componenti 3
  • Effective (and peak) current 250 Arms suggested up to 100 kW
  • Precision 1.0% f.s.
  • Tolerates DC current without affecting the reading
  • Secondary in screw terminal block
  • Maximum cable diameter 28.00 mm
  • Size: 105 mm x 57 mm; D 67 mm

  • Effective (and peak) current 500 Arms suggested up to 200 kW
  • Precision 1.0 % f.s.
  • Tolerates DC current without affecting the reading
  • Opening
  • Secondary in screw terminal block
  • Square hole for bars measuring max. 81 x 31 mm square
  • Size: 150 mm x 80 mm; D 60 mm

  • suggested up to 400 kW

Higher powers available on request.

Clever Pick-up

Clever Pick-up
Device equipped with photo-diode for reading the production and/or grid meter.

Available in the wired or 868 MHz radio version

Clever Antenna WiFi

Clever Antenna WiFi
  • For use when there is a poor signal from the access point
  • Adhesive film attachment on the outside of the electric control panel
  • Cable length 400 mm
  • Size 115 x 20 mm, 5 mm thick
  • Gain 6 dBi

Clever Antenna GPRS

Clever Antenna GPRS
  • For use when there is poor coverage by the GPRS signal
  • Antenna base with magnet for attaching to a metal base, or adhesive film for attaching to the outside of the electric control panel
  • Cable length 3,000 mm
  • Size base diameter 30 mm, h = 300 mm
  • Gain 3 dB

Access Point WiFi

Access Point WiFi
  • Preconfigured for interface with CLEVER BOX WiFi
  • Wireless conformity IEEE 802.11b IEEE 802.11g IEEE 802.11n
  • LAN conformity IEEE 802.3IEEE 802.3uIEEE 802.1xIEEE 802.1q
  • Wireless encryption WEP Encryption-64/128 bit WPA Personal (WPA-PSK using TKIP or AES) WPA Enterprise (WPA-EAP using TKIP) 802.1x Authenticator 802.1x Supplicant-MD5/TTLS (CB & CR mode) Hide SSID in beacons
  • Support ip IPv4
  • Optional antenna connector SMA-Reverse
  • Maximum height 26 mm
  • Maximum width 123 mm
  • Maximum depth 105 mm

Router LAN

Router LAN
  • 4 LAN ports
  • LAN speed 10/100 Mbps IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.1x
  • Wan Fast Ethernet connection
  • Backup wan Dynamic IP Static IP PPPoE 802.1X + Dynamic IP 802.1X + Static IP L2TP PPTP
  • IPv4 support
  • Integrated firewall YES
  • Vpn support YES
  • CE, RoHS, SFT, EMC conformity declarations
  • Maximum width 165 mm
  • Maximum depth 108 mm
  • Maximum height 28 mm